ALTRONIX AL600ULADAJ Fire Alarm NAC Power Extender- 24VDC or 12VDC6.5 Amp. Compatible with Class A or B circuits, 2 inputs.
[AL600ULADAJ] |
Call for price |
|
 |
Features
- ALTRONIX AL600ULADAJ Fire Alarm NAC Power Extender- 24VDC or 12VDC6.5 Amp. Compatible with Class A or B circuits, 2 inputs.
- Model AL600ULADAJ is an extremely cost effective 6.5 amp voltage regulated remote power supply/battery charger. It may be connected to any 12 or 24 volt Fire Alarm Control Panel (FACP). Primary applications include Notification Appliance Circuit (NAC such as strobes and horns) expansion support to meet ADA requirements. It also provides auxiliary power to support system accessories. The unit delivers regulated and filtered 24 or 12 volt power to Class B or Class A NAC loop circuits. Additionally, a separate 1.0A auxiliary output with reset for four (4)-wire smoke detectors is available. The 6.5 amp rated supply current can be divided between the four (4) outputs for powering NAC devices. Each output is rated at 2.5 amp max. An individual output of 4 amp is achieved by paralleling 2 outputs. In non-alarm condition independent loop supervision for Class A and/or Class B FACP NAC circuits is provided. In the event of a loop trouble the FACP will be notified via the steered input (input 1 or input 2). In addition, there are common trouble output terminals (NC, C, NO) which are used to indicate general loop/system trouble. A common trouble input is provided for optional NC (normally closed) devices to report trouble to the FACP. Two (2) FACP signaling outputs can be employed and directed to control supervision and power delivery to any combination of the four (4) outputs.
- 12VDC or 24VDC selectable output.
- 6.5 amp max total alarm current.
- 115VAC 60Hz., 3.2 amp.
- Interfaces with one (1) FACP Class B indicating circuit.
- Compatible with 12VDC or 24VDC fire panels.
- Short circuit and thermal overload protection.
- Built-in charger for sealed lead acid or gel type battery backup.
- Maximum charge current .7 amp.
- Zero voltage drop upon transfer to battery backup.
- AC input and DC output LED indicators.
- AC fail supervision (form "C" contact rated @ 1 amp 28VDC).
- Low battery and battery presence supervision (form "C" contact
rated @ 1 amp 28VDC).
- Lifetime Warranty• .
|
